I finally have finished setting up my wife's new computer. Her old one was underpowered and overwhelmed, terribly slow, frequently giving "out of memory" messages, when it wasn't completely crashing. She took it to a PC expert guy in the neighborhood, but he wanted nearly $500 to unclog it and add a little memory--and it still would be underpowered. So we decided to buy her a new one.
I had two main problems setting up the new one. The first was connecting it to the internet. Both the old and the new computers are notebooks, and the way I connected up the old one originally was to use a NetBlaster and Cable Free PC card from Sohoware, which I connected to a router from the same company.
When we moved to our new apartment I had the electrician run a Cat5 cable between our offices, but I never got around to actually using it. That would have meant getting a NIC PC card for her computer. Since my wife never complained about the connection speed (probably because the whole computer was so slow), it never got very high on my priority list.
Her new computer has a built-in NIC, so all I needed to do was to connect the router to the wall socket in my office, and the computer to the wall socket in her office. But when I did this it didn't work. I had already tested the NIC in my office and it's fine. I tested both cables. They're fine. Something in the wall isn't right, apparently. Maybe I'll call in our new electrician to look at it, one of these days.
So I went back to using the wireless connection. First I had to find the driver software for the PC card--which, to my amazement, I actually could. I installed it, but got an error message. Fortunately I could take the computer into my office and connect it directly to the router. I went to the Sohoware website, where I found there was a new driver for Windows XP--with all kinds of warnings that they didn't guarantee it would work. Wonderful. I downloaded and installed it. No go. Then I guessed there might be a conflict between the old and the new drivers, so I uninstalled both of them, and reinstalled the new one. Success!
The other main problem was transferring all of the old files to the new computer. The last time I got a new computer I used the PC Replicator software from Alohabob. But I couldn't use it this time, because the new computer does not have a parallel port or a serial port. I had a null modem serial cable, so I tried using it with a USB-serial adaptor, but that didn't work. Finally I went out and bought a new version of the Replicator (Ultra Control), which comes with a USB bridge cable.
I still wasn't out of the woods, though. I installed the software on both machines, checked to see if there were any updates (there weren't), and plugged in the cable. I followed the instructions, shutting down all the other programs running. Then I started the Replicator's scan of the old PC, and got the blue screen of death. Great. I restarted the machine and tried it again (this is not as crazy as it sounds--there might have been something clogging things up from when I installed the program). This time it did start to scan, but after a few minutes it crashed again.
Well, it was some progress, but I decided to try something a little different. This time after I rebooted I did not shut down the other programs running. I just launched the Replicator, and it worked! It completed its scan. It found 10,431 files (1.68 GB) to transfer. I went through the list (it was well organized, I didn't have to look at every single file name), and eliminated a few I knew shouldn't go.
But there was another problem. There was incompatibility of user names. On the old machine, running Windows 98, no user name was ever specified, so it was "Default." But on the new PC, running XP, a user name was required. It said that it wasn't necessary to have the same user names, but that some things wouldn't work right on the new computer because of it. So I went back to old PC, and after all this time, created a user, with the same name as the one on the new PC. Then I transferred all of the "Default" things to the new user name.
Then I had to rerun the scan of the old computer. This time no incompatibilities were found. It estimated an hour and 13 minutes would be needed.
It actually took a little less than that. Everything transferred. Suddenly the wallpaper from the old machine appeared on the new one. I checked everything I could. The only problem I could find was that the e-mail was put under a different identity from what had come in during the last few days. I figured out how to merge them.
So unless my wife finds anything else wrong, I think I'm done there (well I do have to take the empty carton down to the basement). Now on to the next project: updating the Crossdressers International website.
3 hours ago
2 comments:
Check the pins at the back of the socket; they are usually reversed. I forget the exact color-code, but it's easy to find. It actually should be marked on the connector plate itself. (There should be 6 wires; if you have 4 wires connected, you have Cat-3).
Also, there should be at least 1", preferably 2" of slack between the cable end and the end of the wires; they should be wound loosely around the connectors. I usually leave at least 3", but I'm paranoid and did cabling for a *long* time.
Another thing to try: push the wires into the connectors with a 1/4" screwdriver, or better yet - an old credit card, cut to about 1/4" wide.
If that doesn't work, drop me an email. (Michelle has the address).
Good luck!
-- Carolyn Ann
PS How are you?
Thanks, for the suggestions, Carolyn Ann. Actuall, the first thing I did after testing the external cables was to check the socket in my wife's office. All the wires were in their proper places (there are 8, not 6). I did a little of the pushing down as you suggested, though everything looked secure. Maybe I'll try it again.
But the socket in my office is another story. It's buried behind my desk, a massive, L-shaped thing that would take hours to unload enough to move. I barely had enough room to plug the cable in.
Since I did get the wireless connection working, and my wife is happy with it, fixing this is not very high on my priority list.
P.S. I'm fine, how are you?
Post a Comment